Controls and Operation
position
6 = Medium
position
10 = High
position
12 = Maximum
Operating the Unit
This cooktop is equipped with touch sensitive
controls and you are only required to place your
fingers on a sensor which is positioned
under neath the glass top to indicate an adequate
response from the unit. The spots where these
sensors are placed are marked by appropriate
signs on the glass. Also, to be able to use the
unit, you should have obtained a utensil suitable
for induction cooking.
Tur ning the Coil ON
To star t, put the utensil on the coil which you
would like to use, then locate the set of controls
for the coil. This is indicated by a small dot on the
ON/OFF sign on the glass top.
To tur n the element (coil) ON place a finger on
the ON/OFF sign. The LED above this sign will
become lit, and a ’0’ (zero) should appear on the
numeric display.
Now the element is ready for you to adjust the
power output. Note that if you do not indicate any
power for the element, it will tur n itself off
automatically after 10 seconds.
Power Output Adjustment
The power output level is shown on the digital
display and it can be adjusted by either :
- Touching the ’+’ (plus) or the ’-’ (minus) sign on
the control. The setting would change in single
increments of 1 between 0 and 12; or
- Touching preset power levels on the control. The
settingwould change as follows:
Tur ning Coil OFF
Tur n the coil off byu touching the ’ON/OFF’ sign
on the control . The digital display and the LED
will tur n off.
12
