Hearthstone Quality Home Heating Products, Inc
CARINA Series 8910
7
Factory-Built (Metal) Wood-Burning Fireplace Requirements
NOTE
: Any parts that are removed must be removed
in a way that would allow them to be re-installed if
the insert is ever removed (removal of rivets or screws
is acceptable).
The damper ("A") and grate (with log set) ("B") must
be removed (see the illustration below)
The smoke shelf ("C"), internal baffles ("D"), screen
("E"), masonry lining or refractory ("G" & "I"), and
metal or glass doors ("F") may be removed if they are
attached by mechanical fasteners (if applicable).
The fireplace must be permanently marked to
indicate that it has been altered and is no longer
suitable for burning solid fuel (wood), unless the
removed parts are re-installed.
Cutting of any sheet metal parts is prohibited.
The insulation ("H"), and any structured rigid frame
members must not be removed or altered (side and top of door frame, side and top of the face of the fireplace,
metal sides, etc.).
Attach the "This fireplace has been altered" tag to the fireplace (use two screws or other suitable
method). You may wish to place it in a location where it will be covered by the surround panel.
