Hearthstone Quality Home Heating Products, Inc
CARINA Series 8910
12
Position the CARINA
Fireplace Insert in front of the
fireplace opening to prepare for Installation.
The CARINA
Fireplace Insert is equipped with a removable Venting Connector Plate. Remove this plate from
the unit as follows:
With the Vent Connector Plate
separated from the unit, attach the
flex liners you have dropped into
the fireplace cavity to the plate
using hose clamps, making sure
that the Intake and Exhaust are
connected to the correct collars.
Remember the exhaust liner is the
one that was marked with paint
earlier.
Locate the Vent Connector
Plate locking bar on the top of
the unit
Lift up on the locking bar to release
Push bar towards the rear, sliding
the Vent Connector Plate halfway
down in its locating track. At this
point it will be possible to remove
the plate from the fireplace insert
body by lifting the plate upwards
Take care not to damage the
sealing gasket affixed to the
insert body.
