Hearthstone Quality Home Heating Products, Inc
Bristol Model 8763
9
Always use gloves and eye protection when handling
the decorative ceramic fire logs and burner. Use care
when handling these parts as they are fragile and
subject to damage and breakage if handled roughly.
See the firebox access instructions on page 9.
Unpack and inspect the logs for damage. Inspect the
metal burner as well. Open the other boxes and
inspect the components. If log, burner or any other
component damage is encountered, contact your
dealer for a replacement. Otherwise, set the logs and
other components aside until called for during the
installation.
Dismounting from Pallet
With the accessory boxes removed and set aside,
remove the four lag screws that fasten the unit to the
pallet. Take care not to mar or chip the sto
ve’s finish.
Have someone help lift the stove off the pallet, taking
care to avoid damaging components mounted under
the stove.
INSTALLER:
Leave this manual with the appliance.
INSTALLATEUR :
Laissez cette notice avec l’appareil.
CONSUMER:
Retain this manual for future reference.
CONSOMMATEUR :
Conservez cette notice pour
consultation ultérieure
Firebox Access
1. Remove top of the stove (lift off). Set carefully
aside on a soft surface (Figure 1).
2. Release the front panel by lifting up and off of the
stove body and set aside (Figure 2).
3. Remove glass and frame by holding the glass
retainer tab with one hand while compressing the
glass retention spring forward with the other and
lifting the bolt heads slightly clear of the stove
glass frame one at a time (Figure 3).
4. Gently release pressure on the glass/frame and
allow to tilt outward and lift up and off of the stove
(Figure 4).
While glass and retention frame are removed from
the stove, perform log set installation as descirbed
on pages 27-28. Reverse procedure outlined above
to reinstall.
Vent Attachment Inspection
– unbent and attached rings
Figure 1
Figure 2
Figure 3
