9
Hearth & Home Technologies • IFT-RC400 & IFT-ACM Installation Instructions • 2326-982 Rev. Q • 4/21
3. Operation
Turn Flame On/Off
Toggle this function to turn ON or OFF your appliance.
Flame Height
Thermostat
FUNCTIONS
FUNCTIONS
You can set your desired flame height level to affect the
ambiance and control the heat output.
Your appliance will remember the previous flame height
setting and adjust the flame to that level 10 seconds after
start.
SCREEN
SCREEN
You can set and maintain your desired room tempera
-
ture with the thermostat function. This function automati-
cally adjusts your appliance to maintain the desired set
temperature (ST).
To achieve the most accurate thermostat function, locate
your IFT-RC400 remote control in the same general space
that you want to have the temperature controlled by your
appliance. For best results, keep your IFT-RC400 control
away from direct radiant heat from the appliance, adja
-
cent windows and doors, HVAC vents, and direct sunlight.
To use the thermostat function, access the main menu
screen on your remote, and select thermostat. Next, sim
-
ply select your desired set temperature by using the ar-
row keys and press ON to confirm the setting. The actual
room temperature (RT), measured by your IFT-RC400
remote, will be displayed in the upper right corner of the
main menu screen. To turn the thermostat function off,
simply select thermostat on the main menu screen and
select OFF.
If the RT cools to more than 2 °F lower than the ST for
at least 2 minutes, then your appliance will automatically
turn ON. The thermostat function will automatically adjust
the flame height based on the difference between the RT
and the ST. As the RT rises closer to the ST, the flame
height will automatically adjust down. If the RT rises 2 °F
above the ST for at least 2 minutes, then your appliance
will automatically turn OFF.
During thermostat use, you will not be able to set your
desired flame height level. Your appliance will automati
-
cally adjust flame height based on the difference between
the RT and ST.
FUNCTIONS
DYNAMIC ICONS
INDICATOR BAR
SELECTION
INDEX
ROOM TEMPERATURE
DISPLAY
1
OFF
2
3
4
Fan Speed
Introduction
This operation section serves as a quick reference to the
screen, functions and indicators on your IntelliFire Touch
remote control.
Note:
The display will remain illuminated if you hold a
finger on the screen. When you are ready to
make your next selection, you must remove your
finger and then continue with your next selection.