Hearth and Home Technologies Expedition-I, Manual

Page: 152 / 167

JJ Calibrations, Inc.
7724 SE Aspen Summit Drive
Portland, OR 97266-9217
Phone 503.786.3005
FAX 503.786.2994
Certificate of Calibration
Certificate Number: 743897
PO:
Property #:
Serial #:
User:
Model:
Description:
Make:
Accuracy:
*Recommended Due:
As Received:
As Returned:
Action Taken:
Order Date:
Procedure:
Calibrated on:
Technician:
°C % RH Environment: Department:
80531676
N/A
Control Company
03/18/2022
Within Tolerance
03/18/2021
22
146
Calibrated w/Parts
±1°C ±0.2362Hg(±8mb)
404323
N/A
1033
03/08/2021
064
Digital Temp. / Barometer
Within Tolerance
37
4198
Authorized By: N/A
0723.01
Replaced batteries.
644A Thunder Scientific 1200 Two Pressure Humidity Generator 11/17/2021 734190
847A Fluke RPM4 Reference Pressure Monitor 12/30/2021 738139
Std ID Manufacturer Model Nomenclature Due Date Trace ID
Standards Used
Parameter
Unit
UUT
Uncertainty
Measurement Description Range
Measurement Data
Before/After
Accredited =
ü
Min Max Reference *Error
Temperature
°C 8.1E-02
20.00
20.1 0.1
ü
19.0 21.0 °C
°C 8.1E-02
30.00
30.2 0.2
ü
29.0 31.0 °C
°C 8.1E-02
40.00
39.3 0.7
ü
39.0 41.0 °C
Barometer
mbar 6.2E-01
1013.0
1005 8
ü
1005 1021 mbar
Remarks:
* Many factors may cause the unit to drift out of calibration before the recommended due date. Any reported error is the absolute value between the reference and the unit.
PFS TECO
11785 SE Hwy 212
Suite 305
Clackamas, OR 97015
Calibration
Uncertainties include the effects of the unit.
*
*
Inspector Rev # Issued 15 03/25/2021 Reviewer 3
This instrument has been calibrated in accordance with the JJ Calibrations Quality Assurance Manual and is traceable to either the SI or to National Institute of
Standards and Technology (NIST). The quality system and this certificate are in compliance with ANSI/NCSL Z540-1-1994, ISO/IEC 17025-2017, ISO
10012-1, the ISO 9000 family and QS 9000. The expanded uncertainties of measurements for this calibration are based upon 95% (2 sigma) confidence limits.
Unless stated in the comments, certificates reflect the "Simple Acceptance Rule" as specified by JCGM 106:2012. Unless otherwise stated, a test accuracy ratio
(TAR) of 4:1, if achievable, is maintained. The results reported herein apply only to the calibration of the item described above. This report may not be
reproduced, except in full, without written approval of JJ Calibrations.
Page 1 of 1 Certificate: 743897