Hearth and Home Technologies Expedition-I, Manual

Page: 145 / 167

072731-239-041621-ACC-USI
Attachment to Calibration Certificate:
Handbook 44 Tolerance Assessment
© METTLER TOLEDO
This is an original document and may not be partially reproduced without the
written permission of the issuing calibration laboratory.
Page 1 of 1
Software Version: 1.23.0.77
Report Version: 2.13.4
Handbook 44 Tolerance Assessment
(Acceptance)
Assessment done without considering measurement uncertainty.
The measurements from the attached calibration certificate were assessed against the Tolerances defined by NIST Handbook 44.
The range of measurements for both Eccentricity and Repeatability (if performed) tests is assessed against Maintenance Tolerances.
As Found As Left
Overall
= Passed
= Failed
Weighing Device
Range Max. Capacity Verification Scale Interval (e) Class Readability (d)
1000 lb 1 0.02 lb 0.02 lb III
Tolerances according to NIST Handbook 44
Test Load
From To
Tolerance
0.00 lb 0.00 lb 0.005 lb
0.02 lb 10.00 lb 0.01 lb
10.02 lb 40.00 lb 0.02 lb
40.02 lb 80.00 lb 0.03 lb
80.02 lb 1000.00 lb 0.05 lb
As Found
As Left
Tolerance
Eccentricity and Repeatability
Test Test Load Tolerance
As Found As Left
Max. Error / Range Result Max. Error / Range Result
325 lb Eccentricity (Max. Error) 0.05 lb 0.00 lb 0.00 lb
325 lb Eccentricity (Range) 0.1 lb 0.00 lb 0.00 lb
500 lb Repeatability (Max. Error) 0.05 lb N/A 0.02 lb N/A
500 lb Repeatability (Range) 0.10 lb N/A 0.02 lb N/A
Max. Error: Maximum of the absolute values of the individual errors.
Range: Difference between largest and smallest measurement value.
Error of Indication
Reference Value
As Left
Error of Indication
As Found
Result Error of Indication Result
Tolerance
0.01 lb 0 lb 0.00 lb 0.00 lb 1
0.05 lb 250 lb 0.00 lb 0.00 lb 2
0.05 lb 500 lb 0.00 lb 0.00 lb 3
0.05 lb 750 lb 0.00 lb 0.00 lb 4
0.05 lb 1000 lb 0.02 lb 0.02 lb 5
0.05 lb 750 lb 0.00 lb 0.00 lb 6
0.05 lb 500 lb 0.00 lb 0.00 lb 7
0.05 lb 250 lb 0.00 lb 0.00 lb 8
0.01 lb 0 lb 0.00 lb 0.00 lb 9