Hearth and Home Technologies Expedition-I, Manual

Page: 102 / 167

21 04/21 7094-802A
Corner Brackets
Figure 21.1
Trim Kit
Option
Flat
Surround
Figure 21.2
Figure 21.3
Figure 21.4
G. Flat Surround with Trim Kit
1. Follow steps one through three of Flat Surround
installation on page 20 .
2. Lift surround assembly to front of appliance (Figure 20.3
on page 20) .
3. Assemble trim as shown in
Figure 21.1
.
Overall
Dimensions
Part
Number
Trim Kit
Standard Size 43” x 31” SP1-4331 TRIMKIT-4331-NL
Large Size 51” x 34” SP1-5134 TRIMKIT-5134-NL
NOTE: May need to pull appliance away from fireplace to
clear mantle as you slide the trim over the flat surround.
7. If needed push appliance back into fireplace.
8. Reinstall face to front of
appliance (Figure 20.2 on page 20) .
9. Reinstall the door to the face of the
appliance (Figure 20.2 on page 20) .
6. Install two steel springs on each side of the flat surround
towards the bottom and the assembled trim kit (Figure
21.4) .
5. Install two steel springs at the top on each side and
between the flat surround and the assembled trim kit as
shown in Figure 21.3
4. Slide trim over flat surround as shown in Figure 21.2 .