Fig 1
Fig 2
Fig 3
.
.
.
Press and hold the “Set” button for 3 seconds till the screen
shows “
” , (Fig.1), to reset
s .
parameter
Press the “mode” button for three times till the screen
displays “
”(Fig.2) means the system is ready for
resetting hot water temperature.
Press “-“ or “+” button to adjust the desired hot water temperature.
The temperature value is confirmed by the system till the screen
stops blinking ,Hot water temperature adjustment allowed range
is 20
-96
. The default setting is 92
.
℃
℃
℃
Press the “mode” button for four times till the screen
displays“
”(Fig.3) means the system is ready for
resetting cold water temperature.
Press “-“ or “+” button to adjust the desired cold water temperature.
The temperature value is confirmed by the system till the screen stops
blinking, cold water temperature adjustment allowed range is 5~15
.
℃
The default setting is 5
.
℃
Press the “mode” button to turn the display mode of hot or cold
water temperature.
Press “Set” button to exit settings and then the dispenser is
ready to serve.
The Powder Barrel
Soak the barrel into water.
Wipe it with a soft cloth.
Dry it and put it back to
place. It is recommended
to clean the barrel once a
month.
Water Tank
Wipe the water tank
with a soft and clean
rag scrub the interior.
It is recommended to
clean the water tank
once a month at least.
Mixer and Stirring Cup
Take the cup apart. Soak
the parts into water. Wipe
them with a soft rag. Dry
the parts and put it back to
place. It is recommended to
clean the cup daily.
Drip Tray
Pour the water in the drip
tray from time to time as
needed and wipe it. It is
recommended to wash
the drip tray daily.
Dispensing nozzle
Wipe the nozzle with wet
wipes and then with dry
cloth. It is recommended
to clean the nozzle daily.
Adjust Temperature
Cleaning
11
