Water Tank
Turn off the power
Pull out the drain on the back of the
dispenser and take the pipe plug out.
(Warning: Be aware of burning by hot
water when unplugging the pipe)
Drain all the water from the tank.
Open the rear cover behind the
dispenser with a cross screwdriver.
Open the tank cover and remove the
connection joint of the water level
sensor at the bottom of tank. Pull the
tank gently by following the direction
of arrow.
Fan Cover
Carefully remove the fan cover at the
back of the dispenser by following the
direction of the arrow shown on the
right figure.
(Moisture inside the dispenser mixed with powder,
which is easy to cause pollution. Please disassemble
and wash it in a regular basis.)
Decomposing Parts
15
