8
ADJUSTING
THE
VOLUME
CONTROL
Program Control:
Your Apollo-E600 is equipped with a multi-
memory program button located just below the volume wheel.
Press the button to select your program setting.
Your Apollo-E600 will help you identify which program
setting you are using. When you select program 1 you
will hear one beep, program 2 will emit two beeps and
when program 3 is selected you will hear three beeps.
Setting 1: Normal setting – 1 beep.
This setting is
best when used for normal listening situations.
Setting 2: Noise setting – 2 beeps.
Reduces the amount of low
frequency amplification. Often helpful in noisy situations.
Setting 3: Whistle reduction setting – 3 beeps.
Use if your
Apollo-E600 whistles or if sounds seem too sharp or tinny.
CHOOSING
YOUR
PROGRAM
SETTING
Program
control
1-800-221-2099 • HearingHelp.com
You have a “smart” Apollo-E600:
Each time you turn your Apollo-E600 on,
it will be on the same program setting you were using when you turned it off.
Increase
Decrease
Volume Control:
Your Apollo-E600 is equipped
with a volume wheel. To adjust the volume
up and down, rotate the volume control wheel.
The higher the number shown on the wheel,
the more amplification.
TALKING
ON
THE
TELEPHONE
You can use your Apollo hearing aid while talking on the
telephone. Hold the phone close to your hearing aid. You
may need to move the phone around a bit until you find
where the hearing aid best receives the sound coming from
the phone. If you experience feedback (squeal), you may
need to tilt the phone at a slight angle.
