1-800-221-2099 • HearingHelp.com
9
IMPORTANT
CARE
INSTRUCTIONS
BEGINNING THE DAY:
After showering, apply
all lotions, creams, hairspray, perfume and
cologne BEFORE putting on your Apollo-E600s.
Water and such sprays can damage hearing aids. And please remember, your
hearing aids are sensitive and don’t like extreme heat or cold. Never place your
Apollo-E600 in water. If it becomes wet, let your Apollo-E600 stand in a dry
place or DryAid dehumidifier for several hours. NEVER use heat (blowdryer, oven,
microwave, etc.) to dry your Apollo.
AT THE END OF THE DAY:
When your Apollo is not in use, turn the aid completely
off and connect it to the charging cord. With the Apollo turned off, you can be
assured your hearing aid is not squealing. A squealing hearing aid can attract pets
which have been known to chew on hearing aids and damage them beyond repair.
MAINTAINING
YOUR
DEVICE
It’s important to clean your Apollo hearing aid regularly. Without
regular cleaning, wax and moisture can build up and prevent the
hearing aid from working properly. It’s best to clean your Apollo-E600
in the morning before you use it.
Cleaning your hearing device:
1.
Wipe off the outside of the hearing aid and eartip with a soft cloth or
hearing aid cleaning wipes (call to order).
2.
Use the included cleaning brush and tube cleaning tool to gently
remove wax and dirt from the hearing aid sound openings.
How to clean the thin tube:
1.
REMOVE the THIN TUBE from the device (see pg. 5).
2.
REMOVE the EAR TIP from the TUBING (see pg. 6 ).
3.
Insert the cleaning tool into the triangular base at the
end of the thin tube and thread it all the way through
so it comes out the other end of the tubing.
4.
Wipe off any debris on the end of the cleaning
tool before pulling it back through the tubing.
Purchase replacement slim-tubing cleaning tools by calling 1-800-221-2099.
1
2
3
