Healy Wellness, Instructions For Use Manual, Page: 14 / 520

14 | EN
5. Cleaning and maintenance
5.1 General
Maintenance activities increase the lifespan and safety of the Healy.
Cleaning reduces the risks of cross contamination and infections.
Please read this section carefully.
5.2 Cleaning
Switch off the Healy before cleaning. For cleaning, commercial clean -
ing products may be used. The surfaces can be wiped with a damp
sponge or cloth. Do not use too much liquid and make sure that no
liquid penetrates beneath the covers or enclosures.
Caution:
Do not use cleaning agents with solvents (e.g. acetone, nail polish,
cleaners) or abrasive cleaners as they will damage the surface.
5.3 Storage between applications
After the application unplug all cables and electrodes and put them
into the storage case and store in a cool and dry location. Refer to the
safety notes for environmental storage conditions.
5.4 Maintenance
There are no serviceable parts by the users. In a case of damage,
please contact the manufacturer. The following maintenance activi-
ties are recommended and should be considered for safe working.
Frequency By whom Maintenance activity
Prior to each use User Check housing, cables and
electrodes for damages. In
case of damage, contact
the manufacturer or an
authorized dealer
5.5 Troubleshooting
In the following you find typical warnings or messages that are related
to the app or hardware of the device. If you face an event that is not
listed here or a problem still exists, please contact the manufacturer.
Event or message Cause Actions required
No connection from
the smartphone to
the device
Device is
switched off
Switch on the device
and restart the App
No connection from
the smartphone to
the device
Bluetooth
in your
smartphone is
deactivated.
Open connectivity
settings and acti vate
Bluetooth
Repeated short
blinking of right LED
Batteries are
low
Charge the device