Healy Wellness, Instructions For Use Manual, Page: 12 / 520

12 | EN
cation page you can set the intensity of the application by using the
plus and minus buttons.
When the electrical circuit is closed the circle, which is an indicator for
the time, will switch from black to white (see figure 4.1.5 ).
4.2 Handling of the Healy hardware
During the application you should use the clip on the back of the
device to attach the Healy to your clothing. The electrodes should be
affixed as shown in the App (please refer to chapter 10). Route the
electrode cables to the Healy so that you feel comfortable.
4.3 Starting the application without the smartphone
The device always stores the last application program. By pressing
the on-switch of the Healy hardware, the last program that was sent
from the smartphone to the device will start with an intensity of 15%.
4.4 Stopping the application
You can see the current progress of the program running on the de-
vice by using the App.
• To stop the application select one of the following:
•
briefly press the on/off-switch (pause mode)
• tap the icon in the application mode in the app (see figure 4.4.1 )
• hold the on/off-switch for about 10 seconds until device hardware
resets
• in emergency situations it is possible to remove the electrodes or
disconnect the electrode cables
Figure 4.1.3: Information page
for the placing the electrodes
Figure 4.1.2: Program page