Healy Wellness, Instructions For Use Manual, Page: 10 / 520

10 | EN
3.1.6 Connection of the electrodes
The electrodes have been tested and evaluated together with the
Healy and are safe and effective for use, if the recommendations and
advice in this manual are followed. Check the package containing the
electrodes and make sure the gel is intact; if the package is visibly
dented or damaged, do not use the product.
Put the plugs of the electrode cables into the sockets of the Healy.
Place the electrodes onto the desired area.
Important note on using the adhesive electrodes:
• Never place electrodes in the region of the carotid artery
• Do not place the electrodes on open wounds
• Before use clean the application area and if necessary shave the
area
• Clean and dry the application area before placing the electrode on
it
• Avoid the use of solvents as these could cause skin irritation and
reduce the adherence of electrodes.
• If using alcohol to clean the area, make sure that it has completely
dried before applying the electrodes.
• Connect the electrode to the cable of the device.
• Check the functioning of the system before beginning the proce-
dure.
• If the procedure is interrupted, check the functioning of the system
again before recommencing the session.
• Remove the liner and apply the electrode to the skin surface.
• Before switching on the device, check the adherence of the elec-
trode to the skin surface.
Figure 3.1.5.3: Scan serial
number screen
Figure 3.1.5.4: Connect screen