Healthstream T790, Service Manual

Page: 58 / 61

T790 Treadmill
PREVENTIVE MAITENANCE TIPS
8 Section6
so that they lay inside plastics. Then gently
set the console (1) on the console base (2) by
aligning the three pins. Be careful not to
pinch or damage the cables.
Once you have the console in place, secure
the console with three nuts (11) and washers
(4). Tighten the three nuts on the console
base (2) after they are in position.
4. ASSEMBLE THE FRONT COVER
Use Phillips screwdriver to perform this
assembly procedure.
Turn on the treadmill to ensure that all
connections are connected properly by
checking that the console display functions
properly;
Then secure the front motor cover (9) to the
base frame(C) with four self-tapping screws
(8) along the top and four screws (10) along
the bottom;
Tighten the eight screws
（
8
）
and
（
10
）
on
the front motor cover (9) after they are in
position.
PRE-OPERATION CHECKLIST
Ensure that all fasteners are tight.
Make sure the RUNNING BELT is properly tensioned and aligned according to the Operation
Manual.
Check the operation of the STOP switch and tether switch assembly. (See Operation Manual.)
Confirm the display console is set to English or Metric units. (See Optional Settings ENGIMET
in Operation Manual.)
Read the entire Operation Manual before using the treadmill.