Healthstream T790, Service Manual

Page: 28 / 61

T790 Treadmill
How To…Replace The Incline Motor - Continued
Tools Required: Phillips Screwdriver (All fasteners are metric. Make sure that you have metric tools.)
12 Section 3
When incline motor needs calibration:
1. When controller is changed.
2. When incline motor is changed.
3. When both controller and incline motor are
changed.
4. When controller CPU is changed.
CALIBRATION
1. To calibrate, make sure the treadmill is not
running (running belt not moving).
2. Turn power on. Wait for a few seconds.
3. Press the STOP and SPEED- buttons at the
same time, then both STOP and SPEED+, and
then SPEED-. Now the treadmill is in calibration
mode.
Press the START button. The treadmill will run
calibration the incline motor.
4. Run through a few functions to make sure
everything is in good condition.
STOP START SPPED+/
SPEED-