Healthstream T790, Service Manual

Page: 11 / 61

T790 Treadmill
OPERATING T790 CONSOLE
Section 2 3
S
e
c
ti
o
n
I
I
TWO WORKOUT OPTIONS:
Manual mode (Quick start):
1. Turn power on
2. Use START button to activate treadmill in manual mode. Starts treadmill at 1.0 Km/H and 0% grade
3. During workout manually adjust speed and or elevation
4. Stop treadmill at any time.
Pre-set program mode:
1. Turn power on
2. Select one of pre-set programs
3. During workout treadmill will adjust speed and elevation according to custom program settings. User will still be
able to adjust elevation or speed during workout. Program will scale accordingly.
4. Stop treadmill at any time to end the workout.
DISPLAYS
1. Dot matrix will show heart shape change size from small to big. Keep repeating .
2. LCM display message “SELECT WORKOUT or PRESS START” in two segments. Do not-scroll.
3. At the same time, green LED lights for 0-9 will light up one at a time…slowly to show buttons should be used to
select program.
4. If user selects one of programs, go to pre-set program display logic.
5. If user presses START button, LCM will display “QUICK START” and dot matrix display will count down
3…2…1…GO
6. Treadmill will activate at 0% grade and 1 Km/H
7. During workout, Calories, Pulse, Distance, Speed will show in the four 7 segment LED display. Time will show in
the LCM.
8. During workout in quick start mode, dot matrix will show speed, one column for one minute. Last column shows
current speed.
9. During workout, if user presses UP or DOWN key, LCM will change from Time to Elevation and show the elevation
old value being changed to the new value. Once the change is made, the view will return to the TIME display .
10. During workout, if user presses FAST or SLOW key, the speed will change.
11. During workout, user may also use the direct speed control keys: 0-9. Example: change speed from 3.4 Km/H to
12 Kph. Just press 1 and 2. And speed will adjust to 12 Km/H. Dot matrix will show new speed. After two
seconds, treadmill speed will adjust.
12. During workout when STOP button is press, the LCM display will show “PAUSE” and the Dot matrix window will
count down from 3:00 minutes. During this pause mode, only START and STOP buttons will function. If START
is pressed during the pause mode, then workout resumes. If STOP is pressed during the pause mode, then
workout is stopped.
13. When treadmill is stopped (not paused) , total values for calories, distance and time and average speed will be
displayed on the LCM – scroll data twice. Pulse will continue to pick up signal and show the current pulse beat per
minute. Distance window will show total distance. Speed will show 0. Elevation will show actual.