10. Alternatively remove the cover and launder, 70º C (160º F), using normal detergents. It is
essential that articles be thoroughly dried after all cleaning procedures and before storage
11. Perform the following steps to clean the power unit and hose fittings:
- Wipe all controls, chassis and hose fittings with a damp cloth and a mild detergent.
- Using a nylon brush, gently clean all crevices as they can contain micro-organisms.
- Air dry all treated surfaces.
WARNING
:
• Switch off the electrical supply to the pump and disconnect the power cable from the
mains before cleaning and inspection.
• Protective clothing should be worn when performing cleaning procedures.
• Do not use Phenol based cleaning solution.
All equipment should be inspected. Any item that is visibly soiled with the patient’s blood or
other body fluids should be properly cleaned or removed. It is recommended that the system
is clean regularly and after each patient use.
In many cases it will be only be necessary to remove the mattress cover for cleaning. If there is
obvious soiling a complete cleaning or decontamination will be required.
Replace Air Filter
1. Remove Air filter and Replace a new Filter.
2. Use a soft bristle brush to remove dust and difficult dried-on soil.
7
