Health O Meter PRO PLUS 1100KL, Operation Manual

Page: 34 / 116

33
Name
ESC
character
ESC value
with
parameters
Description
Response P P ccc=ccc
cccc
This will be the scales response to the request mentioned above
Diagnostics(1)
A A ccc
This is the request for a diagnostic test on certain parts of the scale
(such as battery life, loadcells, keypad, LCD etc.). (See
Table B )
Diagnostics(2) Z Z ccc This will be the response of the diagnostics done on the scale.
Values will include error codes to indicate what is wrong with the
scale, or all zeros to indicate that all is well.
Control (set a
value)
C C ccc=ccc
ccc
his is to set the value of the scale's global settings such as backlight,
auto hold time, keypad beep volume etc. (See
Table A ) (i.e.
<ESC>CAHT=20<ESC>E will set the Auto Hold Time to 20 seconds)
Get subject
record data and
readings G G This will return all the information from both the subject record data
as well as the readings stored in the readings table.
Set subject
ecord data
S S
This will set the subject record data for a specific patient.
Immediately following this will be the value that is set. (i.e.
<ESC>S<ESC>I1234<ESC>T200<ESC>Um<ESC>E will set the
TARE for patient ID1234 to 200kg)
Clear readings
X X
This will clear all the values stored in the readings table on the scale.
Only the subject record data will not be deleted.
Clear subject
record data
Y Y
This will clear the subject record data for a specific patient. The
patient ID will follow the Y immediately (<ESC>Iccccccccccc). If no
ID is given, ALL the data will be cleared.
Name of Control Identifier Unit
Auto Hold Time AHT nn (Seconds)
Auto Off Time AOT nn (Minutes)
Sleep Time STM nn (Seconds)
Keypad Volume VKE nn (01..10)
Stable weight Volume VSW nn (01..10)
Alarm Volume VAL nn (01..10)
Display of Date/Time DAT nn (01 or 10)
Backlight BAC nn (01..10)
Contrast CON nn (01..10)
Weight Display Mode (fractions(f), decimals(d)
or Pounds and ounces (p) WDM c (f,d,p)
Tare Weight TAR nnn.nn (Kg)
Unit Of Measure (Metric or constitutional) UOM c (m or c)
Positions left in RAM RAM nnnn (0..
max
)
Table A - Scale Global Values List and Identifiers
Name of component to test Identifier Error Code
Load Cell A LCA E3A
Load Cell B LCB E3B
Load Cell C LCC E3C
Load Cell D LCD E3D
Battery BAT
E4L(Bat L ow, but still usable) or
E4U (Bat Low and U nstable)
PC Communication (USB) PCC E05
Write to RAM WRM E08
Read from RAM RRM E09
Table B - Components to test