8
1. When sauna is turned on, inside light will light up
automatically.
To turn off the light, simply press the
light button.
2. If you want to change the temperature during your
current session, Press Temp+ or Temp-. When your
sauna is in Celcius mode, temperature will change
by 1°C. In Farenheit mode, temperature will change
by 5°F.
3. If you want to change the session time during your
current session, simply press Time+ or Time-. Time
will change by 5 minutes.
4. If you want to turn off the sauna in the middle of
a session, press and hold the power button and your
sauna will turn off.
When your sauna session is over End will flash on
time display and
you will hear 3 beeps. The sauna will
turn off automatically after 5 seconds.
Time (not sauna session time) is not
displayed when your sauna is in
session. During your session you can only
see the countdown of your session time.
The Reserve and Clock button
are not functional when your
sauna is in session.
B. Getting Started
10. Changing the Settings During Your Sauna Session
11. Using the Multi Color LED Light > see optional accessories on page 17
12. Error Codes
EO: Temperature Sensor Disconnected.
ES: Temperature Sensor Short Circuit.
OHT: Inside Sauna Temperature is over the limit (180°F/82°C).
OHR: Inside of Controller is overheated (180°F/82°C).
EO
ES
IN CASE OF AN
EO
OR
ES
ERROR CODE, PLEASE CONTACT CUSTOMER SERVICE FOR FURTHER ASSISTANCE*
OHT
OHR
OHT
and
OHR
error will be resolved automatically. During OHT and OHR error, your sauna will automatically
shutdown and go into a cooldown period.
(
*
)
Contact Information for Customer Service (PLH Products, Inc.) :
• Toll Free Phone No. in the U.S.A. :
(800) 946-6001
• Telephone No. :
(714) 739-6600
• Fax No. :
(714) 739-6607
• Email :
