head rush technologies TRUBLUE iQ, Operator'S Manual

Page: 32 / 48

TROUBLESHOOTING WEBBING WEAR
Symptoms Potential Causes Potential Solutions
BUMPER
STITCH
DEPLOYED
Unit mounted low
Mount the unit higher or develop routes that
minimize the impact of the bumper stitch on
the Nozzle at the finish of the climb.
Normal use of the TRUBLUE
iQ
The bumper stitch is designed to absorb
impacts with the Nozzle. Over time,
these impacts will bend the webbing and
slowly pull out the stitches. Trim any loose
threads. If the bumper stitch is completely
unraveled, the webbing assembly must be
replaced.
WEBBING
FACE WEAR
SIDE WEAR
LOOP
FAILURE
& HAND GRIP
WEAR
Webbing is rubbing on the
wall (overhang or corner
of wall)
Move the TRUBLUE iQ so the webbing does
not rub on the wall/corner.
Webbing is rubbing on a
hold
Look for problem holds. Move the hold. Do
not place large holds immediately below
TRUBLUE iQ.
Foreign objects, including
dirt and/or dust have intro-
duced damage to webbing
assembly
Make sure to cover the TRUBLUE iQ when
not in use. Wipe the webbing with a dry
cloth daily, after use.
Normal use of TRUBLUE iQ
Parts and webbing wear over time with normal
operation, replace webbing as necessary.
BAR TACK
DAMAGED
Climbers are rubbing the
bartack on holds or the
wall
Monitor routes with the TRUBLUE iQ to mini-
mize contact with holds or wall features while
climbing.
UV FADED
WEBBING
Sun is damaging webbing
Remove TRUBLUE iQ at the end of day or cov-
er unit and webbing after use. Allow webbing to
retract into the device when not in use.
HAND GRIP
WEAR
Hand grip is rubbing
against wall/holds
Look for problem holds. Move the hold.
Normal use of TRUBLUE iQ
Parts and webbing wear over time with nor-
mal operation, replace webbing as necessary.
WEBBING IS
MOLDY/
DISCOLORED
Webbing is not being dried
after being used in wet
conditions
Whenever using the TRUBLUE iQ in wet
conditions, take the unit down at the end
of the day, extend the webbing in a sanitary
environment, and allow webbing to dry
outside of the unit.
32
www.headrushtech.com | +1-720-565-6885