HDCVT TECHNOLOGY HDC-E5100W, User Manual

Page: 5 / 10

5. O pe ra tio n C o ntro ls a nd Func tio ns
5.1 Encoder Panel
Storage Temperature
Relative Humidity -4 - 140°F / -20 - 60°C
20 - 90% RH (no condensation)
Resolution /
Cable Length
1080P60Hz -
Feet / Meters
HDMI IN / OUT 42ft / 15M
The use of “Premium High Speed HDMI” cable is highly recommended.
Name Function Description
Power LED The LED will illuminate red when the encoder is powered on.
LINK LED
(Green)
HDMI IN HDMI source input port for connecting the HDMI source device.
DC 5V Connect the DC 5V/2A power adapter.
PAIR button
Press and hold the PAIR button, then power on the encoder,
the device will enter the upgrade mode.
SERVICE port Firmware update port.
IR OUT
Connect the IR blaster cable. The IR blaster signal is from the
IR IN port on the Decoder.
Antenna port Connect the WiFi antenna.
The LINK LED flashing means that the encoder and decoder
are paired successfully. (Please refer to “5.3 Pairing
Instruction” for details)
3 / 7
8
No.
1
2
3
4
5
6
7
1 2 3 4 5 6
7
LINK HDMI IN DC 5V
SERVICE IR OUT PAIR
8 8