5.2 Decoder Panel
Name
Function Description
Power LED
The LED will illuminate red when the decoder is powered on.
LINK LED
(Green)
HDMI OUT
HDMI output port for connecting the HDMI display device.
DC 5V
PAIR button
SERVICE port
IR IN
Antenna port
4 / 7
Connect the DC 5V/1A power adapter.
Firmware update port.
Connect the IR receiver cable. The IR signal is sent to the
IR OUT port on the encoder.
Connect the WiFi antenna.
The LINK LED flashing means that the encoder and decoder
are transmitting video signals. (Please refer to “5.3 Pairing
Instruction” for details)
Press and hold the PAIR button, then power on the decoder,
the device will enter the upgrade mode.
8
No.
1
2
3
4
5
6
7
1
2
8
5
6
7
8
3
4
IR IN
SERVICE
PAIR
LINK
DC 5V
HDMI OUT
Summary of Contents for HDC-E5100W
Page 10: ...20C ...
