HDCVT TECHNOLOGY HDC-E5100W, User Manual

Page: 7 / 10

Connect the encoder and decoder with an HDMI cable. Power on the decoder
firstly, then power on the encoder after the power LED and LINK LED of the
decoder are always on. After successful pairing, the LINK LED of the decoder
will flash. If the LINK LED of encoder is always on, it indicates that the encoder
and decoder has not been connected or paired. When there is video signal
transmission, the LINK LED of decoder will flash; When there is no video
signal transmission, the LINK LED of decoder will be always on.
IR Receiver and Blaster pin’s definition is as below:
IR RECEIVER
IR BLASTER
IR Blaster
IR Receiver
IR Blaster Signal
Power
NC
IR Signal
Power
Grounding
5.3 Pairing Instruction
Decoder’s LINK
LED status (Green)
Description
Always on
The encoder and decoder are not paired
or connected.
Always on Successful pairing.
Flash
The encoder and decoder are paired
successfully, and there is video signal
transmission.
5.4 IR Pin Definition
5 / 7
Encoder’s LINK
LED status (Green)
Always on
Flash
Flash