HBM T12, Manual

Page: 84 / 92

T12
84
A1979 − 10.0 en HBM
Rotational speed/angle of rotation output
Measuring point designation MySpeedMeasPnt
Measuring point number 0
Mechanical increments 360 * /720 *
Signals F1/ F2 Frequency *
Pulse (pos. edge)/direction of rotation
Pulse (pos./neg. edge)/direction of rotation
Pulse (4 edges)/direction of rotation
Output pulse division 1*; 2; 4; 6; 8; 12
Increments per revolution 360 * /720 *
Hysteresis for reversing the
direction of rotation
On * ; Off
Frequency output
Signal Torque low pass 1 *
Torque low pass 2
Mode 10 +/ − 5 kHz *
60 +/ − 30 kHz *
Setpoint (value) of physical point 1 0.000 * (dep. on nominal (rated) measuring range)
Setpoint (value) of physical point 2 1000.000 * (dep. on nominal (rated) measuring range)
Frequency of point 1 10.000000 * (dep. on electrical configuration)
Frequency of point 2 15.000000 * (dep. on electrical configuration)
Analog output
Signal Torque low pass 1*
Torque low pass 2
Rotational speed low pass 1
Rotational speed low pass 2
Measuring point number 0
Mode 10 V *
Setpoint (value) of physical point 1 0.000
*
Setpoint (value) of physical point 2 1000.000 *
Voltage of point 1 0.0000 *
Voltage of point 2 10.0000 *
Power
Unit W; kW *; MW; hp
Decimal point .; .0; .00; .000
*
Low pass filter ( − 1 dB) 0.1 Hz; 1 Hz * ; 10 Hz; 100 Hz
SIGNAL CONDITIONING
Torque
Shunt On; Off *
Shunt signal (of nominal (rated)
value)
10%; 50% *
Zero signal compensation Zero signal compensation
Zero value 0.000 *