The first DAQ job with catman
EASY
CX22B-R
A4722-1.0
HBM: public
55
► Start your DAQ project via
Start
in the
Measurement
group.
If you have not generated a visualization you will be
asked if one of the default settings for visualization
should be used.
► Click on
Measure without display
,
if a monitor is not
connected during measurement.
CX22B‒R measurement mode is activated. If you have
defined a start trigger, this will be waited for, if not, mea
surement will start. The "RUN" LED flashes while waiting
for the start trigger and glows continuously as soon as
measurement starts.
Important
The "ERROR" LED lights up if there is an error in cat
man
EASY, e.g. if the connection to the devices at
project start cannot be set up or if the DAQ job cannot be
started. The "ERROR" LED flashes if the available free
memory drops below 1 GByte.
Tip
More information about catman
[
EASY can be found in
the catman
[
EASY
online Help.
General default settings, data storage and
directories
You should also consider whether additional directories
should be specified as default settings, and how to pro
ceed with the sensor database.