manualshive.com logo in svg

HBM SomatXR CX22B-R, Operating Manual, Page: 16 / 86

Share
Download
HBM SomatXR CX22B-R Operating Manual Download Page 16

Introduction

16

A4722-1.0

  

HBM: public

CX22B-R

3

Introduction

This manual is intended to support you in making the
basic settings of your SomatXR Data Recorder
CX22B-R.

The 

CX22B‒R

 Data Recorder has an integrated WLAN

module. An antenna can be screwed on via the standard­
ized SMA socket (RF coax type). A bendable antenna is
included with the product.

All measurement technology settings are implemented
using catman

EASY, which has an extensive online

Help.

This manual shows you:

S

How to start up the module.

S

What can be connected and what to look out for.

S

How to start your first measurement and DAQ jobs
and how to get to the measurement data.

The following documentation is also available:

S

SomatXR MX modules operating manual with the pin
assignment of the MX modules

S

Data sheets

S

Online Help in the catman

EASY and MX

-

Assistant

software

S

Tips for use on topics such as GPS, camera or how to
connect wheel force transducers like Kistler RoaDyn

.

The device is a SomatXR module with the "Windows 
Embedded‐8 Standard

TM

"

 

operating system and 

pre-installed catman

Easy software from HBM

.

 Most of

the software functionality is described in the data sheet.

Interfaces 

on the back

 of the Data Recorder:

Summary of Contents for SomatXR CX22B-R























































































Reviews:

No comments