manualshive.com logo in svg

HBM SomatXR CX22B-R, Operating Manual, Page: 38 / 86

Share
Download
HBM SomatXR CX22B-R Operating Manual Download Page 38

Operating the Data Recorder

38

A4722-1.0

  

HBM: public

CX22B-R

6.2.2

Connection via a network

The settings for the CX22B‒R Data Recorder again de­
pend on your network configuration. Please contact your
network administrator to obtain the correct settings.

► Install the "HBM Device Manager" program from the 

system CD.

► Launch the program on your desktop or via the Win­

dows Start menu

.

► Click on 

Find modules

.

► All the QuantumX and SomatXR modules, including

the Data Recorders, will appear in the list

.

► The IP addresses and subnet masks of the PC inter­

faces are displayed in the 

Settings of my computer

section on the left.

► In the 

TCP/IP settings for CX22B‒R 

click on 

LAN

and select 

DHCP off

 - normal in networks. 

Please

note the specifications of your network administrator.

► Click on 

Apply

 

and wait until the new setting is shown

at the top. The red circle should change into green
into green and thereby indicate that a connection is
possible.

► Select the CX22B‒R once again in the list at the top

and then click on 

Remote connect

.

For the next steps, please proceed as in the previous
Section.

Summary of Contents for SomatXR CX22B-R























































































Reviews:

No comments