Safety Instructions
AD105D
A05569_01_X00_00
HBM: public
3
1
Safety Instructions
Intended use
The AD105D digital transducer electronics must only be used for measurement
tasks and directly related control tasks within the application limits detailed in
the specifications. Any other use is not the intended use.
Any person instructed to carry out installation, startup or operation of the de
vice must have read and understood the operating manual and in particular the
technical safety instructions.
In the interests of safety, the device should only be operated by qualified per
sonnel and as described in the Operating Manual.
The AD105D is not intended for use as a safety component. Please also refer
to the “Additional safety precautions” section. Proper and safe operation re
quires proper transportation, correct storage, siting and mounting, and careful
operation.
Operating conditions
S
Please observe the maximum permissible values stated in the specifica
tions for:
- Max. supply voltage
- Max. voltage for the input and output
- Max. current of the output
- Temperature limits
S
You must install the AD105D in an enclosed housing to meet the EMC
guidelines.
S
The safety requirements of EN 61010 must be observed
1
.
S
The design or safety engineering of the device must not be modified without
our express consent. In particular, any repair or soldering work on compo
nents is prohibited.
Safety requirements for electrical measurement, control, regulatory, and laboratory equipment