Interfaces
AD105D
A05569_01_X00_00
HBM: public
19
Address range
An address is necessary to be able to identify the nodes in the bus system un
ambiguously. The address may be between 1 and 127. The factory setting is
63. To change the address use the PanelX program or a configuration tool for
CANopen. The transducer electronics support the LSS protocol as defined by
CiA DS305.
Saving settings
To complete the settings, save all of the parameters to the non-volatile mem
ory of the transducer electronics with the
TDD1
command.