HBK FS22SI, User Manual

Page: 72 / 90

FS22SI
BRAGGMONITOR SI USER INTERFACE
72
Fig. 7.21 Select data import location
Stop Acquisition
To stop the acquisition, press the “stop" button ( Fig. 7.12 ), on position number 2 in
Fig. 7.8 . It will return to the state showed in Fig. 7.11 .
7.1.4 Software and Interrogator Information
General information about the software and the interrogator can be displayed by pressing
the “info" button (number
4 in Fig. 7.8 ).
7.1.5 Exit Application
To exit BraggMONITOR SI Software application, press the Exit button (number 5 in
Fig. 7.8 ).
7.2 Graphical Area
The graphical area is divided into five tabs:
S
Graphical View
S
Numerical View
S
Spectral View
S
Configuration
S
SCPI Interface
7.2.1 Graphical View
On the Graphical View, graphical representation of the measured values can be found
over time (number
1 in Fig. 7.22 ).
It is possible to enable and disable the graphical representation of one or more sensors
by checking and unchecking the check boxes (number
2 in Fig. 7.22 ). The displayed sen­
sors can be changed by clicking on the scroll down menus along the right-hand side of
the interface (number
2 in Fig. 7.22 ).