HB-TP180/200
Checking Facility for Temperature Control Units
Safety
O8354-EN 2018-11
15
2.5 Specific dangers
The following section lists the residual risks that have been
determined by the risk assessment.
Heed the safety instructions listed here, and the warnings in
subsequent chapters of this Manual, to reduce health
hazards and to avoid dangerous situations.
Hot materials
WARNING!
Danger of burns due to hot working materials!
During operation, working materials can reach high
temperatures and pressures and can cause burns
on contact.
Therefore:
– Only allow work on the hydraulics to be carried
out by qualified personnel.
– Before beginning work on the hydraulics, check
whether working materials are hot and under
pressure. If necessary, cool the unit down,
depressurise and switch off. Check that the unit
is free of pressure.
Hot surfaces
CAUTION!
Danger of burning on hot surfaces!
Contact with hot components can cause severe
burns.
Therefore:
– Always wear protective clothes and protective
gloves when working on hot components.
– Before starting work make sure that all
components have cooled down to ambient
temperature.
