HB-TP180/200
Checking Facility for Temperature Control Units
Safety
O8354-EN 2018-11
11
2.2
Customer’s responsibility
The device is implemented commercially. Thus the owner of the
device is subject to legal industrial safety obligations.
In addition to the safety instructions in this Manual, the safety,
accident prevention guidelines and environmental protection
regulations, applicable at the site of implementation must be
complied with. In particular:
Owner must inform himself of applicable industrial safety
regulations and determine additional hazards that arise due to
the specific working conditions prevailing at the site where the
device is implemented, in a risk analysis. The risk assessment
must be implemented in the form of work instructions for device
operation.
Owner must check throughout the entire implementation period
of the device, whether the work instructions that owner has
created satisfy current legislation, and must adapt the
instructions if necessary.
Owner must clearly regulate and specify the responsibilities for
installation, operation, maintenance, and cleaning.
Owner must ensure that all employees who deal with the device
have read and understood this Manual.
In addition, owner must train personnel at regular intervals and
inform personnel of the hazards.
Owner must provide personnel with the required protective
equipment.
In addition, owner is responsible to ensure that the device is
always in a technically perfect condition, and therefore the
following applies:
Owner must ensure that the maintenance intervals described in
these operating instructions are complied with.
Owner must have all safety devices inspected regularly for
function and completeness.
