11
1
For Your Information
1. General Information
• Please make sure that the user of this tool
carefully reads these operating instructions
and fully understands all information given
before it is used.
• These operating instructions contain impor-
tant advice that is necessary for a safe and
trouble-free operation of your HAZET tool.
• For effective use of the tool as intended, it
is essential that all safety and other infor-
mation in these operating instructions is
adhered to.
• For this reason, always keep these operat-
ing instructions together with your HAZET
tool.
• This tool has been designed exclusively for
specific applications. HAZET emphasizes
that any modification to the tool and/or
use on an application not detailed to its
intended application are strictly forbidden.
• HAZET will not be liable for any injuries to
persons or damage to property originating
from improper application, misuse of the
tool or a disregard of the safety instructions.
• Furthermore, the general safety regulations
and regulations for the prevention of acci-
dents valid for the application area of this
tool must be observed and respected.
2. Explanation of Symbols
ATTENTION :
Please pay attention to these
symbols!
Read the Operating Instructions!
The owner of this tool is obliged to
observe the operating instructions
and should ensure that all users of
this tool use it according to the infor
mation given in this manual.
NOTICE!
This symbol marks advice which is
helpful when using the tool.
CAUTION!
This symbol marks important specifi
cations, dangerous conditions, safety
risks and safety advice.
ATTENTION!
This symbol marks advice which
if disregarded results in damage,
malfunction and/or functional failure
of the tool.
3. Liability and Warranty
• Any deviation from the intended use
and/or any misapplication of the tool
is not allowed and will be consid-
ered as improper use.
• Any claims against the manufacturer and/
or its authorized agents because of damage
caused by improper use of the tool are void.
• Any personal injury or material losses
caused by improper use of the tool are the
sole responsibility of the owner.
Summary of Contents for 4932-17
Page 19: ... 19 Notizen Notes ...