REV2-9
TLC Series
haywardflowcontrol.com
4.4. MAINTENANCE
Figure 4.3. Method of connecting cables to the clamping connectors
The unit does not have any internal replaceable or adjustable components available to the user. Pay
attention to the ambient temperature in the room where the unit is operating. Excessively high
temperatures can cause faster aging of the internal components and shorten the fault-free time of the unit's
operation. In cases where the unit gets dirty do not clean with solvents. For cleaning use warm water with
small amount of detergent or in the case of more significant contamination ethyl or isopropyl alcohol.
Using any other agents can cause permanent damage to the housing.
Product marked with this symbol should not be placed in municipal waste.
Please check local regulations for disposal of electronic products.
mA
Wiring Diagram
Source for
Relays output, depends
on the installation
Load no.1
Power supply
85.280V
External
Display
-
-
-
-
+
+
+
+
+
Transmitter
Level Sensor
4-20
Output
17 16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1
J3
J4
4 5
GND
IN V
+
SENTINEL 247
