Function
The HLWIRELESS Wireless Terminal provides the same functionality as the OmniLogic's Local Terminal
except for the following:
•
No Service Mode - The OmniLogic Service mode is only accessible from the Local Terminal.
•
Limited Configuration options - Full access to all OmniLogic configuration settings is only
available at the Local Terminal.
•
Storage Mode Capability - Storage Mode allows the user to turn off the Wireless Terminal completely
(similar to removing batteries) for storage, shipping, etc. Refer to page 8 for more information.
•
Additional icons - The Wireless Terminal will have some additional screens and icons to
control the radio and manage the battery. These new icons are shown below:
Battery Level
Remote Connection
RED
the Wireless Terminal does not have a connection to your home's network
YELLOW
the Wireless Terminal is connected to your home's network, but not
connected to the OmniLogic MSP
WHITE
the Wireless Terminal is connected to the OmniLogic MSP, this is normal
operation
Display Options
The Wireless Terminal offers additional options found in the Display Menu.
Mode
Use the Mode selection to choose daylight or daylight off view. Depending on your selection, the
backlight will be dark or light.
Idle
The Idle selection determines the amount of time before the Wireless Terminal returns to the Idle
Screen after a period of inactivity. Selection options are 30 seconds, 1 minute, 2 minutes, 5 minutes
or always on (never return to the Idle Screen).
Charger
When the Wireless Terminal is in the charging cradle, the display will remain on by default. If you'd
like the display to turn off after a defined time, go to the Charger selection. Options are 30 seconds,
1 minute, 2 minutes, or always on. Note that even when the display is off in the charging cradle, the
Wireless Terminal is still connected to OmniLogic and can respond to commands instantly.
5
USE ONLY HAYWARD GENUINE REPLACEMENT PARTS
