16
Unleaded gasoline is a quality gasoline type. This will help to
avoid damaging the fuel lines of the engine and other engine
parts.
The recommended mixing ratio is 40:1 (make sure the mixing
ratio is correct before filling the product.
a. Mixing
∫
Mix in a clean, empty container (supplied).
∫
Pour the oil into the container.
∫
Pour the fuel into the tank. Mix the mixture long enough (more
than one minute) to get a good combination.
b. Filling the fuel tank
∫
Unscrew the fuel tank cap and remove it.
∫
Fill the tank slowly with the mixture. Do not exceed the maximum
capacity (fill to 80% of its capacity preferably).
∫
Replace the cap on the fuel tank and tighten it
∫
Wipe any spillage around the unit if necessary
Note: To avoid damage and accidents, DO NOT
USE OTHER MIXTURES AND OTHER TYPES OF
OIL / PETROL
c. Storage of fuel
The fuel must be kept in a clean and safe container and
always closed.
If you are not using the product for a long time, remove the
fuel mixture and add it to a container.
Do not leave the fuel for a long time in the product. The fuel
may clog the carburetor and the engine will not operate
properly.
d. Disposal of fuel
When the fuel is no longer used or worn, please dispose of it
in an authorized location. Check local laws regarding disposal
of fuels.
Before using the chainsaw, inspect the work area. This must
be cleared. Remove any branches, obstacles and other items
that may cause damage during cutting.
The unit should always be filled with fuel and useful. Check
the level of filling and refill when necessary.
