background image

5

   HEALTH AND SAFETY

 

WARNING!

 

When using this type of power tool, basic precautions 
should always be followed to reduce the risk of fire, electric 
shock and injury.

• Read all instructions carefully before attempting to use this

product and retain these instructions. Be familiar with all the
operations described in these operating instructions. This
product must be operated and operated by experienced users.

• If you are giving this machine to others, please also provide

them with this instructions manual.

• Also read all markings on the product. The symbols on the tools

are explained in the manual.

• Use this machine as described in this instruction manual. It is

strictly forbidden to use this tool for applications other than
those described in this manual.

• Failure to follow these instructions can result serious injuries

and, in some cases, death.

• This product is intended for private domestic use only. Do not

use it for commercial purposes.

• Never let people unfamiliar with these instructions or children

use this product.

• National regulations may limit the use of the machine.
• People under the age of 18 must not use this product
• Keep in mind that the operator or user is responsible for

accidents or risks to other persons or their property.

• Do not use the tool if you are drunk, tired, under the influence

of drugs or ill. Do not use the tool if you are not in an adequate
physical condition.

• This tool is intended for outdoor use. Never use it indoors.

Summary of Contents for 47912





























Reviews: