25
You must select a SSID if you use the 802.11 Ad hoc.
If you have trouble connecting other brands’ IEEE 802.11b devices using the
“802.11 Ad Hoc” mode, please try “Ad Hoc” mode. The next section shows
you the basic setting of the “Ad Hoc” mode.
B. Ad Hoc Mode
Please follow the procedures below to set the “Ad Hoc” Mode:
1.
Select the “Setting” tab.
2.
Select “Ad Hoc” for Network Type.
3.
Select the correct channel. (The channel of all computers in one
workgroup must be the same.)
4.
Press the “Apply” button.
Channel
shows radio channel numbers used for networking. Channel
number must be the same between stations so computers can communicate in
the same local LAN. It can be changed only under the Ad Hoc Mode.
