- 10 -
TURNING THE FISH FINDER ON/OFF
1. To turn the fish finder ON, press and release the
button.
2. To turn the fish finder OFF, Press and Hold the
button until
“Shutdown” appears on the screen. Release the button.
N
OTICE
:
Pressing the
button during normal fish finder operation will freeze
the screen allowing you more time to decipher the data. Pressing
the
again will renable the scrolling.
N
OTICE
:
The fish finder has an automatic “power-off” feature to prevent
battery drain if you accidentally leave the Fish Finder on. When the
depth display reads “---” continuously for 5 minutes, the display will
shut off automatically.
SETTING THE FISH FINDER IN SIMULATION MODE
1. To place the fish finder in Simulation Mode, while
the fish finder is ON, press and release the
button 1 time
(“Sonar” will appear at the top of the
screen)
2. Press and release the
button until “Simulator” is
highligted.
3. Press the
to turn ON the Similator Mode
(
will appear to the right of
Simulator).
4. Press the
button to turn OFF the Simulator Mode.
5. Press
V | ESC
to exit the menu and start running the simulator.
N
OTICE
:
All features are active in the simulator mode. Use the FishTrax™
simulator to learn how to use the fish finder. The simulator allows you
to adjust features and settings like you are actually operating the fish
finder. Please note that the temperature will be displayed as “---“
unless the Sonar Sensor (
Transducer)
is plugged into the display.
