Hawk HA-FM11, Manual

Page: 9 / 40

Making your wiring connections
There are two acceptable ways of making a wire connection – solder
connections and crimp connectors. When properly performed, either type of
connection is reliable and trouble-free. Regardless of whether you solder your
connections or you use mechanical-type crimp on connections are
mechanically sound and that they are insulated.
Cheap electrical tape, especially when poorly applied, is not a reliable insulator.
It often falls off in hot weather. Use good quality electrical tape or heat shrink.
• Never twist-and-tape the wires together without soldering
• Never use “fuse Taps”, as they can damage fuse box terminals
HA-FM11 manualv3_p1-20_Layout 1 15/08/2016 18:40 Page 9