Hawk HA-FM11, Manual

Page: 22 / 40

(12) Pneumatic lock mode
Turn the ignition (ACC) to ON, press and hold the foot brake, choose icon
on the screen, then quick press the button
to enable pneumatic lock mode, or
press the button to disable it. You should choose pneumatic lock mode if
your car with pneumatic lock (not electric lock). Central door lock output
commend is 3.5s for pneumatic lock, otherwise, 0.5s for electric lock. Factory
default 0.5s.
(13) Re-alarm model and Auto alarm model
a) Re-alarm means:
If the system is in arm status, while you press the button , now the car are in
disarm status, if the car door not open within 25 seconds, the system would
recognise alarm accidently disarmed then it would in arm automatically. Siren
would Sound “DU” once to indicate that has been in arm status. If car original
status is mute arm mode, the siren wouldn’t chirp.
b) Auto alarm means:
If car engine switch off and open and close the door, but not press lock button,
the system would enter into the mute alarm status automatically after 50
seconds, but the central door lock would not lock up.
Operation:
Turn the ignition( ACC) to ON, press and hold the foot brake, choose the icon
, these function are disable if the LCD screen show OFF , press , will show 1
on the screen, then quick press (+) or (-), the digital is change from
1
and
2 . Digital 1 means activate the re-alarm function; digital 2 means activate the
auto alarm and Re-alarm both. Quick press the button to activate these two
functions, press the button deactivate it.
HA-FM11 manualv3_p21-40_Layout 1 15/08/2016 19:33 Page 2