Hawk HA-FM11, Manual

Page: 24 / 40

(7) Door open reminder (programmable).
In arm status , if the door (hood , trunk ) don’t lock property, or the hand brake
not pull up, after 5 seconds the siren would sound du du du 3 time, direction
light flash for 3 time to reminds the user. On the LCD transmitter, it will sound
“di di di” three times, and shows the icon as below:
1.
The icon flashing indicate the side door is not closed property
2. The icon flashing indicate the trunk is not close property
3. The icon flashing indicate the hood is not close property
4. The icon flashing indicate the brake is not pull up.
If the door (trunk, or hood) will be closed, the system will not alarming, if still
not closed after 15s, siren sound alarm , the direction light flash , and LCD
transmitter will flash the place where not close well .
If the issue not solved, the system would keep warning for 4 min.
(8) Re- alarm (programable)
If the system is in arm status, while you press the button , now the car are in
disarm status, if the car door not open within 25 seconds, the system would
recognise that’s a accidental disarm then it would in arm again automatically.
Siren would Sound “DU” once to indicate that has been in arm status. If car
original status is mute arm mode, the siren wouldn’t chirp.
(9) Auto alarm (programable):
Car engine switch off and open and close the door, if not press lock button, the
system not in arm status, the system would enter into the mute alarm status
automatically after 50 seconds, but the central door lock would not lock up.
(10) Central locking system procedure (Ignition locking / unlocking )
When the car in driving, quick press the button , central locking system
would be locked. And press the button , the central locking would be
unlocked.After car drive 10s , press the foot brake , the central locking system
would lock 1 time automatically, it would not be locked if the door is not
closed property; if open car door while press the foot brake , after close car
door , door will lock up automatically while press the foot brake. After car
engine switch off, car door will unlock automatically.
(11) Valet/ Maintain mode (programmable)
When the car needs to be washing or maintain, it can set the function to prevent
from any faulty alarming. It can be program from LCD transmitter to set the
function, for detail operation, please see the Chapter 6: Programable function
of screen icon
HA-FM11 manualv3_p21-40_Layout 1 15/08/2016 19:05 Page 4