background image

C O N S U M E R  WARRANTY

Product), excluding accessories, purchased and installed from a Commercial Electronics authorised 

of one year.

warranty service, the Product must be returned to a Commercial Electronics authorised dealer along 

Note: 
This warranty does not cover subscriber agreements or failure of services provided under the terms 

Purchaser  is  required  to  enter  separate  subscriber  contracts  in  order  to  receive  these  services.  
IN ORDER FOR THIS WARRANTY TO BE VALID, YOUR PRODUCT MUST BE DELIVERED WITH PROOF 
OF  PURCHASE  AND  PROOF  OF  INSTALLATION  BY  AN  AUTHORISED  COMMERCIAL  ELECTRONICS 
DEALER.  ALL  PRODUCTS  RECEIVED  BY  COMMERCIAL  ELECTRONICS  FOR  WARRANTY  REPAIR 
WITHOUT PROOF OF COMMERCIAL ELECTRONICS DEALER INSTALLATION WILL BE DENIED.

This warranty is non-transferable and does not apply to any Product that has been modified or used 
in a manner contrary to its intended purpose, and does not cover damage to the Product caused by 

improper maintenance, accident or unreasonable use, negligence, acts of God, neglect, improper 

spills or customer applied cleaners, damage due to environmental causes such as floods, airborne 
fallout, chemicals, salt, hail, windstorms, moisture, lightning or extreme temperatures, damage due 

a Product which has been opened or tampered with for any reason or which has been damaged due 

EXCEPT AS STATED HEREIN, ALL WARRANTIES INCLUDING BUT NOT LIMITED TO EXPRESS WARRANTY, 
IMPLIED WARRANTY, WARRANTY OF MERCHANTABILITY, FITNESS FOR PARTICULAR PURPOSE, AND 
WARRANTY OF NON-INFRINGEMENT OF INTELLECTUAL PROPERTY ARE EXPRESSLY EXCLUDED TO 
THE MAXIMUM EXTENT ALLOWED BY LAW, AND COMMERCIAL ELECTRONICS NEITHER ASSUMES 
NOR  AUTHORIZES  ANY  PERSON  TO  ASSUME  FOR  IT  ANY  LIABILITY  IN  CONNECTION  WITH  THE 
SALE  OF  THE  PRODUCT.  COMMERCIAL  ELECTRONICS  HAS  ABSOLUTELY  NO  LIABILITY  FOR  ANY 
AND ALL ACTS OF THIRD PARTIES INCLUDING ITS LICENSED DEALERS OR INSTALLERS. IN NO EVENT 
WILL COMMERCIAL ELECTRONICS BE LIABLE FOR ANY INCIDENTAL, SPECIAL OR CONSEQUENTIAL 
DAMAGES (INCLUDING LOSS OF PROFITS), BY PURCHASING THIS PRODUCT, THE CONSUMER AGREES 
AND CONSENTS THAT ALL DISPUTES BETWEEN THE CONSUMER AND COMMERCIAL ELECTRONICS 
SHALL BE RESOLVED IN ACCORDANCE WITH LAW OF ENGLAND & WALES UK.

Manufactured by Commercial Electronics Co. Ltd. Great Britain. © Commercial Electronics 2020.

Summary of Contents for HA-240 Lite v3





















Reviews: