HAWE Hydraulik HICON, Original Assembly Instructions

Page: 7 / 27

2
For your safety
The product is built according to the state of the art and recognized safety regulations.
Nevertheless, there is a risk of personal injury and damage to property if this chapter and the safety
instructions in this manual are not observed.
2.1 Intended use
■
The product is a technical work tool and intended for commercial and industrial use only.
■
The product may only be operated in accordance with the technical data, operating conditions and
performance limits specied in this manual.
■
Only use original accessories and original spare parts approved by the manufacturer.
■
The product may be used to control single and double-acting consumers. The size of the consumers is
limited by the minimum and maximum ll volume of the tank.
Partly completed machinery
The product is a partly completed machine according to the EC Machinery Directive 2006/42/EC and
is intended exclusively for installation in a machine or system. The product is controlled via the
manufacturer's machine / plant control.
►
Comply with the manufacturer’s operating instructions.
2.2 Misuse
■
Use in other operating modes than specied in the intended use
■
Using the product beyond the specied performance limits
■
Do not use the product in potentially explosive areas.
■
Do not paint over seals and hose lines.
2.3 Residual risks
When handling hydraulic uid, comply with the safety data sheet of the manufacturer of the
hydraulic uid.
DANGER
Risk to life due to explosive combustion
Hydraulic uid and its associated mists and vapours are oxidizing. Contact with ignition sources will
lead to explosive combustion. Risk of serious injury or death.
►
Avoid re and open light and do not smoke anywhere near the product.
►
Immediately dispose of any ammable materials moistened with hydraulic uid as hazardous waste.
►
Do not use any ammable or corrosive cleaning agents.
HAWE Hydraulik SE B 8543 - 10-2021 - 1.0 7/27