4
Transport and storage
Observe the following safety instructions additionally to the safety instructions in chapter
.
CAUTION
Personal injury through tipping or falling load
The product might tip over or fall during transport. This could lead to hands and feet becoming trapped.
►
Adhere to the symbols on the packaging.
►
Use permitted transport aids to carefully transport the product as close to the installation location
as possible.
►
Select transport aids that will allow the maximum load to be transported safely.
►
Wear safety shoes, work gloves and safety glasses.
4.1 Scope of delivery
Delivery of the completely assembled units includes:
■
Hydraulic power pack
°
Current-carrying lines with eyelets
°
Connecting lines for CAN bus and signal control with free cable ends
°
Hydraulic connections with protective covers
Hydraulic uid is not included in the scope of delivery.
4.2 Checking the delivery
Unpacking
1. Remove product.
2. Check product for transport damage and completeness.
Note transport damage on the transport documents or on the carrier's delivery bill.
Document transport damage with photos and report to the manufacturer.
3. Properly dispose of the product packaging in accordance with local regulations.
DAMAGE
For any defect found, le a complaint immediately with:
HAWE Hydraulik SE
Einsteinring 17
85609 Aschheim near Munich, Germany
Tel.: +49 89 379100-1491
[email protected]
Claims for damages can only be addressed within the applicable complaint periods. HAWE does not
accept any liability for subsequent complaints.
12/27
B 8543 - 10-2021 - 1.0
HAWE Hydraulik SE
