background image

Before Beginning

Precautions/Précautions

Do not place metal objects or containers of liquid on top of the Docking Station

If a malfunction occurs, immediately unplug the Power Supply and remove the laptop

Use only the specified Power Supply (Part # LPS-114) with this Docking Station

Do not connect cables into ports other than what they are specified for

Do not leave the Docking Station in a high temperature environment (greater than 85°C, 185°F) for a long period of time

Ne placez pas d'objets métalliques ou de contenants avec des liquides sur la station d'accueil

En cas de dysfonctionnement, débranchez immédiatement l'alimentation électrique et retirez l'ordinateur portable

Utilisez uniquement l'alimentation électrique spécifiée (partie # LPS-114) avec cette station d'accueil

Ne pas connecter les câbles dans des ports autres que ceux spécifiés

Ne laissez pas la station d'accueil dans un environnement à températurE élevée (plus de 85°C, 185°F) pendant une longue période

Specifications

Power Supply Input

16.0 V DC-In

Dimensions

10.0” (25.5 cm) H x 11.4” (28.9 cm) W x 4.4” (11.1 cm) D

Weight

2.55 lbs. (1.16 kg)

Operating Environment

-10° C to 50° C (14° F to 122° F)

Storage Environment

-40° C to 85° C (-40° F to 185° F)

EU DECLARATION OF CONFORMITY [CWN1]

Manufacturers Name: 
Manufacturers Addresses:

Havis, Inc.
47099 5 Mile, Plymouth Twp, MI 48170 USA
75 Jacksonville Road, Warminster, PA, 18974, USA

This declaration of conformity is issued under the sole responsibility of the manufacturer.
Product name:  
Model:

Product Options:

Docking Station For Panasonic FZ-G1 AND TOUGHBOOK G2 Tablet
DS-PAN-7XY-Z, where ‘X, Y, Z’ may be any alphanumeric character and which describes product
options.  May be followed by any alphanumeric characters which describe product options.
This declaration covers all options of the above product which bear the CE Marking.

Is in conformity with the following directives, standards, or other normative documents:
UN ECE Regulation 10

EMC Directive 2014/30/EU

UNECE Regulation 10.05, Paragraph 3.2.9; Clauses 6.5, 6.6, 6.7, 6.9; “Uniform provisions concerning the approval of vehicles 
with regard to electromagnetic compatibility”
EN 50498:2010, “Electromagnetic compatibility (EMC) - Product family standard for aftermarket electronic equipment in vehicles”

RoHS Directive 2011/65/EU

EN 50581:2012, “Technical documentation for the assessment of electrical and electronic products with respect to the restriction 
of hazardous substances”

The object of the declaration described above is in conformity with Directive 2011/65/EU of the European Parliament and[CWN2] of the Council of 8 June 2011 on 
the restriction of the use of certain hazardous substances in electrical and electronic equipment.

Supplementary Information:
The object of the declaration described above is in conformity with the relevant Union harmonization legislation. This product requires the use of a recommended 
E Marked automotive power supply when used within vehicles.

Signed for and on behalf of Havis, Inc:

40799 5 Mile, Plymouth Twp, MI 48170, USA

August 13, 2019

Bruce Jonik, Director of Engineering ,  Havis, Inc.

FCC 47CFR, Part 15 compliance:
This is an FCC Class B device. Any changes or modifications to the model DS-PAN-7XY-Z not expressly approved by Havis, Inc. could void the user’s authority to 
operate this equipment.

Summary of Contents for DS-PAN-720 Series














Reviews: