HAVER & BOECKER TYLER Ro-Tap RX-29, Operating Instructions Manual

Page: 18 / 44

© Copyright 2010 by HAVER & BOECKER Page 18/44
1. Introduction
Only install and start the test sieve shaker after having read the following operating
instructions.
The operating instructions give important information about the secure, appropriate and
economic operation of the test sieve shaker. They should be respected in order to avoid
any dangers as well as to maximize the reliability and durability of the machine.
The safety instructions and regulations of prevention of accidents, as well as the different
protective recommendations of the technical associations and employer’s liabil
ity
insurance associations, have to be strictly observed when using the machine.
All safety instructions within these operating instructions have to be followed!
Always keep the operating instructions with the machine.
If used properly, the construction of the machine guarantees that it runs and can be
operated without any risk to persons.
The guarantee does not apply to damages caused by improper use due to a non-
respect of the operating instructions.
All pictures and drawings in these operating instructions are general illustrations. They do not reflect the
construction in detail.
The technical data and dimensions are without obligation, claims cannot be derived.
We reserve technical changes of the machine described below, without changing the operating
instructions.
All rights on these operating instructions, the added drawings and other documents remain to
HAVER & BOECKER. So are the rights on disposition, copying and passing on, including trademark
registering.
2. Safety
2.1
Danger indications and symbols
The following symbols in these operating instructions
mark instructions for a safe operation with the machine.
Follow closely the instruction marked by this symbol in order to
avoid any impairments of the machine or other goods.