Haussmann 59695011, Operator'S Manual

Page: 34 / 41

34
OPERATION INSTRUCTIONS
EN
FEEDING OUT THE CUTTING LINE
This trimmer is equipped with an automatic
line feed mechanism that feeds out more
cutting line when the trimmer is started.
You also can feed the line manually when the
line is too short by pushing and hold the line
release button, pull the line at the same time as
shown in Fig. 17
REPLACING THE SPOOL
WARNING!
Before changing the cutting line
spool, make sure that the trimmer is
disconnected from the power source.
Unscrew the spool cover from the holder. Take
out the empty spool. Refer to Fig.18
Insert new cutting line spool into the cover,
thread the line through the eye-lets, insert the
cartridge into the holder and lock into place
by turning clockwise. Ensure that the Cartridge
clicks into place securely. Refer to Fig.19
REPLACING THE PLASTIC BLADE (item A)
WARNING!
Before changing the cutting blade,
make sure that the trimmer is
disconnected from the power source.
Unscrew the spool cover from the holder. Take
out the spool and spool cover. Refer to Fig.18
Insert the fork (item B) to block motor fan
and fit the plastic blade to the holder. Refer to
Fig.20,21&22.